Skip to main content

2 Hooray


There are epic levels of excitement here as it is nearly new kit time!  I'd better get a wriggle on and blog the remaining layouts from June's Like For Ever kit...


This page is a giant shaker pocket!  I used a white cardstock background and began my layering.  The papers and washi strips from the kit, with the number die cuts, completely overwhelmed my photo.  I started playing with an over and under concept - the photo of the second birthday, the number 2, and the balloons being on top of the vellum whilst the layers and other numbers remain under the vellum.


This softened the other colours allowing my photo an focal pieces to shine.


I added a little glossy accents to one of the balloons for extra pizazz!


I sewed round the edge of the vellum, about 5cm before my line of stitches joined up I unthreaded the machine, and carried on sewing.  This gave me the holes I needed to hand finish the sewing after I had put my sequins inside.  The sequins I chose were a mix from SpiegelMom Scraps and the Maggie Holmes set from a previous Like For Ever kit.

This turned out very differnt from how I had imagined it, but I will definitely be making this type of layout again.  I love the finished article!

Thanks for stopping by!

Linking up to Simons Says - sequins.

Comments

  1. oh just love,this layout hun so beautiful hugs Cherylxx

    ReplyDelete
  2. OMG Laura! This shaker layout is awesome, I have never seen anyone use a 12x12. I love that you placed some items inside and just a few on the outside! Beautiful! This will be my first kit EVER! Looking forward to sharing all the projects with everyone. xx

    ReplyDelete
  3. Fab LO.

    Hope you are enjoying the day. Sue

    ReplyDelete
  4. wow love this layout super
    hugs Kate x

    ReplyDelete
  5. This is SO pretty! I absolutely LOVE the vellum overlay plan! Gorgeous! Thanks so much for playing along with the Sparkle and Shine Challenge on the Simon Says Stamp Wednesday Challenge Blog!

    ReplyDelete
  6. This is so lovely. Your use of generous white space is fabulous.

    ReplyDelete

Post a Comment

Thank you for taking the time to comment.
I love to read your messages...

Popular posts from this blog

Hoppity!

Hoppity hoppity!!  :) Hopeful you have arrived here from Fleur 's blog as part of the Crafty Ribbons Easter Hop .  If not and you've found yourself here wondering what on earth I'm on about (and let’s face it J you wouldn’t be the first!!) check out the Inspirations site for all the juicy details! My project for the hop is         Easter bunting!  I cut three templates first - a triangle pennant, a bird and a heart.        Then I cut the pennant shapes from fibre ribbon, threaded them on to some 3mm satin and evenly spaced them.  I embellished each flag with some beads...       I backed the birds and heart on some thin white card and glued them to the centre of the pennants.   My supplies list: yellow fibre , pink fibre , lime fibre , 3mm satin , button box , white card, glue, beads, needle and thread.   At each stop on the hop there'll be a word to collect and a candy draw. I've got these

WOYWW 159

Hello, Happy Whats On Your Workdesk Wednesday !  As promised a picture of last Wednesdays 'work' finished off.  Post and more photos here . This week I'm showing off the beaded ATC I made... Tricky to photograph so your getting one with flash and one without... It was all parcelled up and sent off to Queen of Desks Julia .  Here is a basic of how it was made... (lots of waffle about wefts and warps!) I use a flexible beading needle.  It is mainly 'eye' so it is very easy to thread. And delica beads which are more regular and accurate than the better known seed bead.  They are slightly more rectangular than round so they line up better. Thread your needle with the weft thread.  (The cross ways thread that weaves back and forth.)  Pick up the beads... Pass the needlefull of beads underneath the warp (tight length ways) threads on the loom... ...and push each bead up in the corresponding g

DMIO: Teach Me Something

A few weeks back I made a dream catcher.  A few readers asked if I could show them how I made it, so, here is my attempt at a tutorial! First up weaving the web. 1. You'll need a hoop and some ribbon/thread/yarn on a bobbin. 2. Attach the ribbon securely to your hoop. 3. Take your ribbon over the top of the hoop... 4. and up through the loop you've just made with the ribbon... 5. so you have a cross over. 6. Continue steps 3-5 until you reach the knot. 7. Now instead of going over the hoop you will crossover the ribbon 8. and through the loop you've just made to give a crossover. Continue on in this fashion until you get to the middle. You need to leave a hole in the middle as this is where the good dreams get through!  They then run down the tassels/feathers/any other hanging decoration and on to the owner.  It should look something like this.  You'll need to play around with your tension until you get a firm web. Now for the tassels - I like to